The ALIZÉ HYGRO VISION (HV) special bathroom and WC extract unit provides an airflow modulated according to the room’s ambient relative humidity and an additional timed airflow (30 minutes) whose opening is controlled by the user.

• For wall mounting, the lens must be located at the bottom of the diffuser.
• For ceiling mounting, the detection lens must face the centre of the room.
• When wall-mounted, the diffusers are simply fitted onto a Ø 125 mm duct or onto a Ø 125 mm spigot for sealing.
• The lip seal provides a secure, watertight seal.
• Ceiling installation can be carried out using a 3-claw plasterboard sleeve or a Ø 125 mm slab penetration sleeve.
• We recommend screwing the diffuser to the wall using the 3 holes provided on the plate.
• 230 V power supply: the diffuser must be powered by a 2-wire cable (2 x 1.5 mm²) to be flush-mounted and routed to the rear of the support plate.
• The power supply must be fitted with a suitable protection device and marked on the electrical panel so that work can be carried out on the diffuser.

• Model: Alizé HYGRO VISION HVP01 humidity sensitive extract unit
• Brand : ANJOS
• Supplier reference: 1770
• For bathroom and WC
• Colour: white
• Power supply: 230 V
• Maximum flow rate obtained by presence detection
• 30-minute delay
• For Ø 125 mm ducts
• Air flow rate (m³/h): 5/40/30
• Class II electrical appliance